manualshive.com logo in svg

Arista 7000 Series, Quick Start Manual

Share
Download
Arista 7000 Series Quick Start Manual Download Page 5

Chapter  1

Overview

This guide is intended for properly trained service personnel and technicians who need to install
selected Arista Networks Data Center Switches.

The following topics are covered in this section:

•

Scope

•

Receiving and Inspecting the Equipment

•

Installation Process

•

Safety Information

•

Obtaining Technical Assistance

•

Specifications

1.1

 Scope

The following Arista Networks Data Center Switches are supported by this guide:

DCS-7050SX-128

DCS-7250QX-64

DCS-7280QR-C72

DCS-7280CR3-96

DCS-7050TX-128

DCS-7260QX-64

DCS-7280CR-48

DCS-7280CR3K-96

DCS-7050SX2-128

DCS-7260CX-64

DCS-7280CR2-60

DCS-7050SX3-96YC8

DCS-7050TX2-128

DCS-7260CX3-64

DCS-7280CR2A-60

DCS-7170-64C

DCS-7260CX3-64E

DCS-7280CR2K-60

Important:  Only qualified personnel should install, service, or replace this equipment.

Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.

1.2

 Receiving and Inspecting the Equipment

Upon receiving the switch, inspect the shipping boxes and record any external damage. Retain packing
materials if you suspect that part of the shipment is damaged; the carrier may need to inspect them.

If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any
accessories that may be packaged in the same box as the main unit.

Inspect the packing list and confirm that you received all listed items. Compare the packing list with
your purchase order. 

Parts List

 provides a list of components included with the switch.

1.3

 Installation Process

The following tasks are required to install and use the switch:

1. Select and prepare the installation site (

Site Selection

).

2. Assemble the installation tools listed (

Tools and Parts Required for Installation

).

1

Summary of Contents for 7000 Series























































Reviews:

No comments

Brands by name

Popular brands

Load more brands