*SECURE THE PIKLER WITH THE KNOBS GIVEN ON BOTH LEGS*
KNOBS
ENSURE ALL THE RODS ARE FASTENED FIRMLY.
IF THERE IS ANY WOBBLE, LOOSEN THE SCREWS,
GIVE A SLIGHT SHAKE TO THE PIKLER – SO THAT
THE SCREWS, ROD AND LEGS ALLIGN TO FIT.
THEN TIGHTEN THE SCREWS WITH THE ALLEN
KEY
SECURE THE SCREWS &
DON’T OVER TIGHT OR TWIST ROD
STEP TO CHANGE THE POSITION OF
THE PIKLER
Ÿ
LOOSEN UP THE SCREW NEXT TO THE
KNOB
Ÿ
REMOVE THE KNOB AND CHANGE TO
THE DESIRED POSITION
Ÿ
SECURE THE POSITION ON BOTH LEGS
WITH THE KNOB
Ÿ
TIGHTEN THE SCREW NEXT TO THE
KNOB WITH THE ALLEN KEY
Ÿ
NOTE: OVER TIGHTENING SCREW OR TWISTING ROD WHEN
TIGHTENING WILL CAUSE THE WOOD NUTS TO LOOSEN
PIKLER TRIANGLE
INSTRUCTION MANUAL
3
