Configure the network-searching mode: Auto or manual.
View and edit your network list.
Select between GSM900/DCS1800 and PCS1900 network bands.
To access the network menu from the idle screen:
1. From the idle screen, press the
MENU
key then use 4-Way
key to highlight the
Call Services
of main menu and press
SELECT
to select the
Call Services
menu.
2. Press
number
5
on the keypad to select the
Network
or use Up/Down
key to highlight
Network
and press the
SELECT
key to select it. The phone will display the submenu. Press number
8
on the keypad to select the
Network
submenu.
Configure Network Searching Mode
1.
Follow the procedure in the preceding subsection.
2. Press
number
1
on the keypad to select the
Select Mode
or use Up/Down
key to highlight
Select Mode
and press
the
SELECT
key to select it.
3.
You can select between
Automatic
and
Manual
modes.
In automatic mode, the phone selects a PLMN (Public Land Mobile Network) in the Network Preferred List during the power-on
sequence. This is the recommended setting.
Manual mode lets you select a PLMN from the Network Preferred List.
After the searching, the network list for all available PLMNs, the phone will display the list on the screen. For each entry, if the
PLMN is recognized in the mobile ROM table, the PLMN name is displayed. Otherwise, the country is indicator is put in front
of the mobile network code: for example, FR 002.
When you select a network from the list, the phone will start registering to the network you selected. If successful, the phone
displays the idle screen; if not, the phone redisplays the network list so that you can try another selection.
If there is no network, the phone just displays the
Searching…
screen. If the phone loses the registered network, it will search the
network again and screen will return to Network Available screen, so that you can select another network again.
View and Edit Network List
1.
Follow the procedure in the preceding subsection.
Summary of Contents for 2600
Page 1: ...2600 Operation Manual ...
