Arikazan Ventum Series, Operation, Use And Maintenance Manual, Page: 13 / 38

- 12 -
In order to prevent corrosion special care needed for oxygen infusion to the heating system water side.
Possible points for oxygen infusion are from open vented cisterns, negative pressure points on the system
and some gas permeable system items like plastic pipes.
V. ABOUT LOG PLACEMENT AND GASIFICATION
Gasification is a process that converts organic or fossil fuel based
carbonaceous materials into carbon monoxide, hydrogen and carbon
dioxide. This is achieved by reacting the material at high temperatures
(>700
°C), without combustion, with a controlled amount
of oxygen and/or steam. The resulting gas mixture is called syngas (from
synthesis gas or synthetic gas) or producer gasand is itself a fuel. The
power derived from gasification and combustion of the resultant gas is
considered to be a source of renewable energy if the gasified compounds
were obtained from biomass. The advantage of gasification is that using the
syngas is potentially more efficient than direct combustion of the original
fuel because it can be combusted at higher temperatures.
To achieve an efficient gasification, logs must be placed considering some
rules. A random placement may adversely affect the wood gasification
process. As a result, the combustion efficiency can drop in total. Following
visuals shown you how it should be placed.
4. START UP PRE-CONTROLS
First start up work shall be carried out exclusively by fully trained, professionally qualified personnel.
Please read the installation, operation, use and maintenance manuals before start up
Before first start up check that;

There is a copy of the boiler and burner instructions in the boiler room.

The boiler name plate and manual specifications and power supply network and other system need
specifications correspond. (electric supply, fuel, water, boiler and burner output, system pressure, circulating
pipes …)

The air inlet and outlet supply openings are correctly sized and free from obstacles.

The flue gas exhaust system is correctly fitted and sized.