9
Complete Installation
ONLY FOR RECIRCULATING VERSION
(Using Recirculating Kit model KIT02665)
Air deflector installation
• Assemble the air deflector with the upper horizontal support
with 2 assembly screws.
A
B
A. Air deflector
B. Assembly screws
• Measure from the bottom of the air deflector to the bottom of
the hood outlet, as shown.
A
A. Dimension to measure
• Cut the duct at the measured size.
• Slip the duct onto the bottom of the deflector.
• Place the duct over the exhaust outlet from the hood.
• Use duct tape to seal the deflector and at the exhaust outlet
from the hood.
• The charcoal filters needs to be clipped on the motor as the
image below shown.
Duct cover installation (both ducted and non ducted versions)
• Attach the upper duct covers using 6 - 3.5x6.5 mm screws.
NOTE: For non-ducted (recirculating) installation, the
slotted holes in the upper duct covers will be visible when
assembled. For ducted installations, the slotted holes will be
hidden down inside the lower duct covers.
