3
Tools and Parts
Parts supplied
Removing the packaging
I
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
I
WARNING!
Remove the protective film covering the product before putting
into operation.
Supplied Part
Pieces
Supplied Part
Pieces
Hood assembly with blower and LED lamps
already installed
1
Lower and upper duct covers
Upper: 2
Lower: 2
5x45 mm
4
8x40 mm
4
4.2x8 mm
60
Duct cover brackets
4
3.5x9.5 mm
2
Vertical supports
Upper: 4
Lower: 4
3.5x6.5 mm
4
2.9x3 mm
2
Leveling screws
2
Torx adapter
#10: 1
#20: 1
6” round air transition
1
Mounting template
1
Horizontal supports
2
Parts not supplied
Tools/Materials required
• Wire nuts
• Tape to mount template
• 6” (15.2 cm) rounded metal duct length to suit installation
• Measuring tape
• Pliers
• Gloves
• Knife
• Safety glasses
• Electric drill with
5
⁄
16
” and 3⁄
8
” bits
• Strain relief
• Spirit level
• Duct tape
• Phillips screwdriver
• Wire cutter/stripper
• Masking tape
• Hammer
• Saw, jig saw or reciprocating saw
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
• Metal vent system
