arietta ADI436SSA, Installation Instruction Manual

Page: 3 / 40

3
Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective film covering the product before putting
into operation.
• Hood canopy assembly with blower and LED lamps already
installed.
• 2 lower duct covers
• 2 upper duct covers
• 8 - Vertical supports
• Upper horizontal support bracket
• Horizontal support
• 6” (15.2 cm) round air transition
• Hardware bag with:
Part Qty Part Qty
5x45 mm
4
Torx 10 adapter
1
4.2x8 mm
60
Torx 20 adapter
1
3.5x9.5 mm
2
Duct cover bracket
4
3.5x6.5 mm
4
Mounting template
1
2.9x3 mm
2
Tools/Materials required
• Level
• Drill with 1¼” (3.2 cm),
1
⁄
8
” (3.2 mm), and
1
⁄
16
” (4,8 mm)
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips screwdrive
r
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
Tools and Parts
For vented installations, you will also need:
• 1 wall or roof cap
• Metal vent system
Parts not supplied
Optional Accessories
Kit # Part Kit # Part
No Return
Valve
KIT0102873
Replacement
carbon filters
KIT01658
Recirculating KIT01938
Replacement
grease filters
KIT01668
CFM
Reduction
EXXCRKR8
Dimensions and Clearances
A
B
C
E
F
G
D
ADI436SSA
A 36” (91.4cm)
B 25
1
⁄
4
” (64 cm)
C*
Max: 49
13
⁄
32
” (125.5 cm)
Min: 29
13
⁄
32
” (74.7 cm)
D**
Max: 44
21
⁄
64
” (112.6 cm)
Min: 29
13
⁄
32
” (74.7 cm)
E 6” (15.24cm)
F 12” (30.5 cm)
G 13
1
⁄
4
” (33.6 cm)
*For non-vented (recirculating installations)
**For vented installations