- 7 -
English
• Do not remove the disc while the appliance is in use.
• Do not overload the bowl. Do not feed in more than one piece at a time.
• To avoid overheating the appliance OBSERVE A MAXIMUM TIME OF 5 MINUTES CONTINU-
OUS USE. When the appliance is to be used several times, allow a pause between operations.
Check that it has cooled down before it is used again.
• Do not use the appliance to cut up foodstuffs which are very hard (for example, ice cubes).
• This appliance must only be used for cutting vegetables and/or fruit.
• This appliance conforms to EU directive CEE 89/336 regarding electromagnetic compatibility.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
DESCRIPTION OF THE APPLIANCE
1) Motorised base
2) Bowl
3) Disc holder
4) Press
5) ON/OFF switch
A) Disc for thin slices
B) Disc for thick slices
C) Disc for julienne vegetables
D) Disc for large julienne
E) Dicing accessory
F) Food guide
12) Power supply cable + plug
13) Spatula
DIRECTIONS FOR USE
- Check that the technical data plate located on the base of the appliance shows the correct volt-
age.
- Before use, wash the parts which come into contact with food in running water.
-
Do not immerse the base containing the motor in water or other liquid
. To clean this assem-
bly, use a damp cloth and dry thoroughly.
-
Before assembling and/or dismantling the appliance, check that it is unplugged from the
power supply.
- Fit the bowl (2) to the base (1) containing the motor.
Now fit the required disc into the bowl (2) and, keeping it pressed down on the disc holder (3),
rotate it a 1/4 turn anti-clockwise until it locks (fig.1).
Insert the food guide (F) taking care that the groove in the external ring faces upwards and that
the wings of the guide are outside the notches on the bowl (fig. 2). A click signifies correct
attachment.
- The dicing accessory (E) can only be fitted to the disc for finely chipped vegetables (D).
Impaginato_Saladino_REV1 28-01-2003 11:11 Pagina 7
