ARIETE saladino 1791, Manual, Page: 12 / 54

EN
- 10 -
Do not press the presser too hard (i) to prevent the motor from slowing down and/or the roll-
ers from kneading.
AFTER USE
- Disconnect plug from socket.
- Disassemble the appliance by rotating the roller locking pin (H) clockwise and then extract it.
- With the motor switched off, remove the roller used and rotate the hopper (L) of about 1/4 of a turn
counter-clockwise, then take it out.
HELPFUL TIPS
Cut food to better insert it into the hopper.
- To obtain small pieces, insert food vertically (not more than a piece at a time).
- To obtain longer pieces or slices, cut pieces so that they can be inserted horizontally into the hop-
per (L).This procedure is recommended especially for the julienne cut.
Best results are achieved with food compact enough.
Do not use the appliance to mince overly hard food (such as ice cubes).
In case of too soft food, and/or too much pressure, and continuous heavy usage, the motor may stop
or the rollers may get kneaded; if this occurs, stop immediately the appliance, disconnect the plug
from the socket, remove the roller and the hopper and clean them thoroughly.
CLEANING
To make cleaning easier, rinse parts off immediately after use.
All accessories, except motor base (A) can be directly washed with water or in the upper part of the
dishwasher.
The motor base is to be cleaned with a slightly damp cloth and wiped thoroughly.
In case the appliance is stained after use, it is recommended to clean it with vegetal oil or mayon-
naise.