English
11
CLEANING AND MAINTENANCE
- Always unplug the kettle and leave it to cool before cleaning.
- Wipe the outside and base with a damp cloth and then dry. Do not use abrasive
products as they could scratch the plastic surfaces.
- Clean with a damp cloth and bicarbonate of soda. Rinse thoroughly.
- Although the kettle has an anti-scale filter, the inside (and filter) needs regular clea-
ning.
Filter
- Open the lid (2) by pressing down on the release device (1) (Fig. 1). The lid will
open automatically.
- Lift out the filter (Fig. 3) with care.
- Wash the filter under running water or use a soft brush. Rinse it thoroughly.
- To refit the filter, slide it downwards until it clicks into place on the tab below the
spout opening.
Removing scale
- When scale builds up on the bottom of the kettle, it must be cleaned using a natu-
ral scale remover such as vinegar or lemon. The presence of lime scale lengthens
boiling times. After you have removed the lime scale with the relevant product, boil
clean water in the kettle several times, throwing it away each time. Make sure that
all scale remover has been rinsed out of the kettle, as there is a risk that it could
damage the components.
- Some areas have particularly hard water. As a result, the boiled water may look
cloudy and leave residues on the sides of the kettle. This build up is normal but it
can be removed with regular cleaning.
- Alternatively, you can reduce the build up of scale by using bottled water (without
gas).
Summary of Contents for Break Arte 2880
Page 1: ...MOD 2880 ...
