9
EN
FIRST USE
At the first use it is recommended to keep the appliance on for a few minutes to eliminate the smell
of "new". The appliance may give out a little smoke when used for the first time.
HOW TO MAKE TOAST
1) Insert the slices of bread inside of the toaster slits (A).
2) Turn the knob (D) to set the desired toasting level
3) Lower the ON/OFF lever (B).
4) After a few minutes the toasting is completed, and the slices of bread are ejected upwards.
5) After use, press the button (E) to switch the appliance off.
6) Disconnect the power supply cable from the power point. Remove any residues from the crumb
tray (I).
7) After use, we recommend using the cord storage (H) to wrap the cord around the appliance base.
Press the button (E) to stop the toasting at any time.
DEFROST FUNCTION
You can use the appliance to defrost frozen bread slices.
1) Insert the frozen slices of bread inside the toaster slits (A).
2) Turn the knob (D) to set the toasting level to position "1".
3) Lower the ON/OFF lever (B).
4) Press the button (G) to activate the defrost function. The button remains lit throughout the de-
frosting time.
If you want to defrost and bake bread at the same time, adjust the toasting on higher levels.
WARMING FUNCTION
You can use the appliance to warm the slices of bread.
1) Insert the slices of bread inside of the toaster slits (A).
2) Lower the ON/OFF lever (B).
3) Press the button (F) to activate the heating function. The button remains lit throughout the warm-
ing time.
The warming time is fixed and can not be modified.
CLEANING AND MAINTENANCE
Regular maintenance and cleaning preserve and maintain the appliance efficient for a longer pe
-
riod.
Danger - Risk of electric shock
All cleaning operations described below must be made with power off and the electrical plug
disconnect from the power outlet.
Danger - Risk of burns
Each cleaning and maintenance operation should be performed when the unit is completely
cooled.
Caution - Risk of material damage
Don't immerse the base in water. Don't use aggressive products or solvents that may dam-
age the plastic.
