PAGE 3 • 2155001-INS-RA • 800.798.0813 • NEED ASSISTANCE?
•
ARIESAUTOMOTIVE.COM
Step 5
With help, lift the bull bar into place and
align the mounting tabs on the outside
of the mounting brackets.
Step 6
Insert a 10mm hex bolt with flat washer
on the outside of the bracket and a
10mm flat washer and nylock nut
on the inside.
Snug the hardware,
but do not fully tighten.
Repeat this step for the
passenger-side bracket.
Step 7
Level and adjust the bull bar into the
desired position and tighten all hardware.
Step 8
Congratulations on the installation of
your new ARIES AdvantEDGE
™
bull bar.
With the bull bar installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on the
first page of this instruction manual.
