ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
RA
•
PAGE 1
INSTALLATION MANUAL
CENTER SECTION
Center Section Parts List
1
TrailChaser
™
center section
8
Hex bolt, M12
16 Flat washer, M12
8
Lock washer, M12
8
Nut, M12
Torque Specifications
M6 bolt
7 ft-lbs.
M8 bolt
16 ft-lbs.
M10 bolt
33 ft-lbs.
M12 bolt
58 ft-lbs.
Use above torque setting unless otherwise noted
Tools Required
Ratchet
Phillips screwdriver
Socket extension
Flathead screwdriver
Socket set
Allen wrench set
Level
Box wrench set
Level of Difficulty
Moderate
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Product Photo (center section only)
Applicable to the Following Part Numbers
2081004
2081003
Product Registration
CURT Group stands behind our products with industry leading warranties.
You can help us continue to improve our product line and help us understand
your needs by registering your purchase by visiting:
warranty.curtgroup.com/surveys
At CURT Group, customer is king. We value your feedback and we use that information to make
improvements on our products. Please, take a minute and let us know how we are doing.
This is the first of two manuals required
to complete this installation. The second
manual is included with your bumper
corners. If installing a brush guard, there
will be a third manual required.
