GB - 6
1. WARNING!
2. DANGER!
3. DANGER!
SAFETY RULES
Read, understand, and follow all safety practices in
Owner/Operator Manual before beginning assembly or
operating. Failure to follow instructions could result in
personal injury and/or damage to unit.
ALWAYS remove key and/or wire from spark plug
before assembly, maintenance or service.
Unintentional engine start up can cause death or
serious injury.
Complete a walk around inspection of unit and work
area to understand:
• Work area • Your unit • All safety decals
ALWAYS check overhead and side clearances
carefully before operation. ALWAYS be aware of traffic
when operating along streets or curbs.
Keep children and people away. Keep children out of
work area and under watchful care of a responsible
adult.
NEVER allow children to operate or play on or near
unit. Be alert and shut off unit if children enter area.
DO NOT allow adults to operate unit without proper
training. Only trained adults may operate unit. Training
includes actual operation.
Keep area of operation clear of all toys, pets, and
debris. Thrown objects can cause injury.
Check for weak spots on docks, ramps or floors. Avoid
uneven work areas and rough terrain. Stay alert for
hidden hazards.
DO NOT operate near drop-offs, ditches, or
embankments. Unit can suddenly turn over if a wheel is
over the edge of a cliff or ditch, or if an edge caves in.
Falling snow, fog, etc. can reduce vision and cause an
accident. Operate unit only when there is good visibility
and light.
Read Owner/Operator Manual.
Keep people away from unit while
operating. Keep children out of work
area and under watchful care of a
responsible adult.
Never direct discharge towards persons
or property that may be injured or
damaged by thrown objects.
Stop engine, remove key, read manual
before making any repairs or
adjustments.
Wear appropriate hearing protection.
ONLY use clean-out tool to clear
blockages. NEVER use your hands.
ROTATING PARTS! ONLY use clean-out
tool to clear blockages. NEVER use your
hands. High speed impeller rotates
below discharge opening. Wait for all
moving parts to stop before removing
clogs or servicing.
OL1801
OL4370
OL0910
OL4010
OL4690
OS6610
ROTATING PARTS.
Keep clear of auger while engine is
running.
•
Read Operator’s Manual.
•
Allow operation only by properly
trained adult, never children.
•
Stop engine and remove ignition
key prior to leaving the operator’s
position for any reason.
•
Keep all controls, guards and
safety devices properly serviced
and functional.
•
Never direct discharge towards
persons or property that may be
injured or damaged by thrown
objects.
OS2080
