GB - 14
Unit
Run with Clutch Bail engaged a few minutes after each
use to free unit of any loose or melting snow.
Inspect unit for visible signs of wear, breakage or
damage. Order any parts required and make
necessary repairs to avoid delays when beginning use
again.
Keep all nuts, bolts and screws properly tightened and
know unit is in safe working condition. Check all
hardware at regular intervals.
Clean unit thoroughly and lubricate (see
Maintenance
).
Paint all scratched surfaces and store in a cool, dry
protected area.
IMPORTANT:
NEVER spray unit with water or store
unit outdoors.
Engine
When storing the unit for extended periods of time,
remove all fuel from tank and carburetor (run dry).
Refer to Engine Manual.
To obtain a complete parts manual, find your model
and serial number. Then go to www.ariens.com or call
1-800-678-5443.
STORAGE
WARNING:
AVOID INJURY. Read and
understand Storage/Fuel Safety Rules before
proceeding.
SERVICE PARTS
Be sure to always use genuine Ariens parts to keep
your Sno-Thro running like new.
Part No.
Description
53200500
Shear Bolt Replacement Kit
03707200
Scraper Blade
07232500
Impeller Belt
21533500
Spark Plug
TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
CORRECTION
Engine will not
crank/start.
1. Key Switch not in run position.
2. Electrical connections loose.
3. Fuel tank is empty.
4. Engine ignition problems.
1. Push Key Switch into run position.
2. Check electrical connections.
3. Fill fuel tank.
4. See Engine Manual.
Engine stops.
1. Mechanical jam in blower rake or
impeller.
2. Faulty spark plug.
3. Polluted fuel supply.
4. Incorrect carburetor adjustment.
1. Turn off engine, remove key, and wait for all
moving parts to stop. Check for and remove
obstruction and repair before restart.
2. Replace spark plug.
3. Replace with clean fuel.
4. Readjust carburetor.
Engine problems.
1. See Engine Manual.
Summary of Contents for Sno-Thro 932500-520
Page 11: ...GB 11 Figure 4 OS1840...
