EN - 10
1. Using a pry bar, remove and discard crate
top and sides.
2. Remove plastic bag from around unit and
discard.
3. Remove plastic boot from negative
battery terminal and discard.
4. Remove hardware from negative (black)
battery cable. DO NOT discard hardware.
5. Secure negative battery cable to negative
(open) battery terminal with hardware
removed in previous step.
6. Pull transaxle bypass levers out to
disengage transaxles. See Figure
IMPORTANT:
Be sure to pull bypass levers
out on each side of unit.
7. Release parking brake. See Figure
8. Push unit off crate and discard pallet.
9. Engage parking brake.
ASSEMBLY
WARNING:
AVOID INJURY.
Read and understand the
entire
section before
proceeding.
Figure
3
Figure
4
Figure
5
