manualshive.com logo in svg

Ariens 991311, Operator'S Manual

Share
Download
Ariens 991311 Operator'S Manual Download Page 8

EN - 4

Safety Decal Descriptions

 1. DANGER!

Discharge Hazard - 

NEVER operate unit 

without discharge chute in 

operating position. Thrown 

objects can cause injury or 

damage.

DO NOT operate mower 

unless all guards are in 

operating position or 

bagger is attached.

 2. DANGER!

DANGER!

Read and understand the 

operator’s manual before 

operating unit.

 2.1 Amputation Hazard

To avoid amputation hazard 

DO NOT put hands near 

rotating blades.

To avoid amputation hazard 

DO NOT put hands near 

moving belts.

Keep hands away from all 

rotating or moving parts.

Keep all guards and shields 

in place.

 2.2 Discharge Hazard

Discharge Hazard - NEVER 

direct discharge toward 

people, pets or property. 

Thrown objects can cause 

injury or damage.

DO NOT operate mower 

unless all guards are in 

operating position or bagger 

is attached.

Keep children and others 

away from unit while unit is 

in operation.

 2.3 Tipping Hazard

Avoid tipping hazard.

DO NOT operate on slopes 

over 15°.

DO NOT operate on slopes 
over 15°.

 2.4 Service Hazard

Before servicing unit do the 
following:

Read owners manual before 
servicing or making 
adjustments to unit.

Set parking brake.

15

15

P

Summary of Contents for 991311



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands