manualshive.com logo in svg

Ariens 991311, Operator'S Manual

Share
Download
Ariens 991311 Operator'S Manual Download Page 18

EN - 14

TRANSPORT LOCK RELEASE 

LEVER

See Figure

 

14.

Releases deck from transport lock position.

DECK LIFT PEDAL

Raises mower deck to change height-of-cut 
setting.

SEAT ADJUSTMENT LEVER

Unlocks seat to allow operator to move seat 
forward or backward and then lock in desired 
position.

PARKING BRAKE LEVER

See Figure

 

15.

Controls the parking brake. The engine will 
not start with brake in the off position.

SAFETY INTERLOCK SYSTEM

Monitors the interaction of various unit 
features for operator safety. 

STEERING LEVERS

Control the direction and speed of unit. To 
stop unit, return both steering levers to 
neutral.

TRANSAXLE BYPASS LEVERS

Engage and disengage the transaxles so unit 
may be moved with the engine off.

ANTI-SCALP WHEELS

Help prevent the deck from contacting the 
ground and scalping the lawn when passing 
over a high spot.

Figure

 

14

Brake Engaged (On)

Figure

 

15

Brake Released (Off)

Summary of Contents for 991311



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands