background image

GB - 3

PRODUCT REGISTRATION

The Ariens dealer must register the product 
at the time of purchase. Registering the 
product will help the company process 
warranty claims or contact you with the latest 
service information. All claims meeting 
requirements during the limited warranty 
period will be honored, whether or not the 
product registration card is returned. Keep a 
proof of purchase if you do not register your 
unit.

Customer Note:

 If the dealer does not 

register your product, please fill out, sign, and 
return the product registration card to Ariens.

UNAUTHORIZED REPLACEMENT 
PARTS

Use only Ariens replacement parts. The 
replacement of any part on this unit with 
anything other than an Ariens authorized 
replacement part may adversely affect the 
performance, durability, and safety of this unit 
and may void the warranty. Ariens disclaims 
liability for any claims or damages, whether 
warranty, property damage, personal injury or 
death arising out of the use of unauthorized 
replacement parts. To locate your nearest 
Ariens Dealer, go to www.ariens.com on the 
internet.

DELIVERY

Customer Note:

 If you have purchased this 

product without complete assembly and 
instruction by your retailer, it is your 
responsibility to:

Read and understand all assembly 
instructions in this manual. If you do not 
understand or have difficulty following 
the instructions, contact your nearest 
Ariens Dealer for assistance. To locate 
your nearest Ariens Dealer, go to 
www.ariens.com on the internet.

Before Attempting To Operate Your 
Unit:

1. Make sure all assembly has been 

properly completed.

2. Understand all Safety Precautions 

provided in the manuals.

3. Review control functions and operation 

of the unit. Do not operate the unit 
unless all controls function as described 
in this manual.

4. Review recommended lubrication, 

maintenance and adjustments.

5. Review Limited Warranty Policy.
6. Fill out a product registration card and 

return the card to the Ariens Company or 
go to www.ariens.com.

DISCLAIMER 

Ariens reserves the right to discontinue, 
change, and improve its products at any time 
without notice or obligation to the purchaser. 
The descriptions and specifications contained 
in this manual were in effect at printing. 
Equipment described within this manual may 
be optional. Some illustrations may not be 
applicable to your unit.

Figure 1

1. Unit Serial Number Label
2. Engine Serial Number Label

1

2

WARNING: 

Improper assembly 

or adjustments can cause serious 
injury. 

Summary of Contents for 986101
























Reviews: