Ariens 986101 Manual Download Page 20

Con_L&G_2011

20

To find an Ariens or Gravely authorized service representative, contact Ariens at:

655 W. Ryan Street

Brillion, WI 54110

(920) 756 - 4688

www.ariens.com

www.gravely.com

To find a Countax authorized service representative, contact Countax at:

Countax Ltd

Countax House

Great Haseley

Oxfordshire

OX44 7PF

0800 597 7777

www.countax.com

Exceptions and Limitations

Batteries are warranted only for a period of 12 months after date of purchase, on a prorated basis. For 
the first 90 days of the warranty period, a defective battery will be replaced free of charge. If the 
applicable warranty period is more than 90 days, Ariens will cover the prorated cost of any defective 
battery, for up to 12 months after the date of purchase. This battery limited warranty does not apply to 
the battery packs on AMP series products.

 Exclusions – Items Not Covered by This Warranty

Engines and engine accessories are covered only by the engine manufacturer’s warranty and are not 
covered by this warranty.

Parts that are not genuine Ariens, Gravely or Countax service parts are not covered by this warranty.

The following maintenance, service and replacement items are not covered by this warranty unless 
they are noted in the Limitations section above: lubricants, spark plugs, oil, oil filters, air filters, fuel 
filters, brake linings, brake arms, brake shoes, runners, scraper blades, shear bolts, mower blades, 
mower vanes, tines, brushes, headlights, light bulbs, knives, cutters. 

Any misuse, alteration, improper assembly, improper adjustment, neglect, or accident which requires 
repair is not covered by this warranty.

Disclaimer

Ariens Company may from time to time change the design of its products. Nothing contained in this warranty 
shall be construed as obligating Ariens to incorporate such design changes into previously manufactured 
products, nor shall such changes be construed as an admission that previous designs were defective.

LIMITATION OF REMEDY AND DAMAGES

Ariens Company’s liability under this warranty, and under any implied warranty that may exist, is limited to 
repair of any defect in workmanship, and repair or replacement of any defective part. Ariens shall not be 
liable for incidental, special, or consequential damages (including lost profits). Some states do not allow the 
exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

DISCLAIMER OF FURTHER WARRANTY

Ariens Company makes no warranty, express or implied, other than what is expressly made in this 
warranty. If the law of your state provides that an implied warranty of merchantability, or an implied 
warranty of fitness for particular purpose, or any other implied warranty, applies to Ariens Company, 
then any such implied warranty is limited to the duration of this warranty. Some states do not allow 
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which 

vary from area to area.

Summary of Contents for 986101
























Reviews: