6 - 26
See your engine manual for information on the opera-
tion and maintenance of your engine. Follow those
instructions for oil and filter changes.
6.2 REMOVING THE ENGINE
1. Drain gasoline.
2. Place unit in the belt service position.
3. Remove both belts from the engine pulleys.
Remove pulleys.
4. If the unit has a bracket at the top of the engine for
chute/deflector controls, unbolt it.
5. If the unit is equipped with electric starting,
disconnect the battery. Remove the starter.
6. Remove the four mounting bolts from the engine
base.
6.3 INSTALLING THE ENGINE
1. Position the engine in the frame.
2. Insert mounting bolts and tighten.
3. If equipped with electric starting, install the starter.
Connect battery.
4. Reattach any brackets for chute/deflector controls.
5. Install pulleys on engine shaft. Do not tighten set
screws.
6. Install belts. Adjust the engine pulleys to align with
attachment and drive pulleys. Tighten set screws.
7. Take unit out of belt service position.
Figure 21
Summary of Contents for 924 Snow-Thro
Page 40: ...11 40 Model 924517 PS0891 PS0850...
Page 41: ...11 41 Model 924516 PS0672...
