Ariens 911250 Owner'S/Operator'S Manual Download Page 6

GB - 6

Complete a walk around inspection of unit 
and work area to understand:

work area

your unit

all safety decals.

Clear work area of stones, sticks, wire and 
foreign objects which might be picked up and 
thrown. Tall grass can hide obstacles.

Know the work area. Stay alert for holes, 
rocks, rough terrain and hidden hazards. 
Keep away from drop-offs, ditches, or 
embankments that could cause operator to 
lose footing or control of unit.

ALWAYS be aware of traffic when operating 
along streets or curbs.

Keep work area clear of all persons, children 
and pets.
Keep children out of the work area and under 
the watchful care of a responsible adult.

ALWAYS operate unit when there is good 
visibility and light.

DO NOT mow wet grass. 
ALWAYS be sure of your footing. Keep a firm 
hold on handlebar. Walk, NEVER run.

Engine/blade control feature on mower stops 
engine and blade within 3 seconds whenever 
operator releases handlebar. Check this 
feature frequently. If feature fails to operate, 
disconnect spark plug wire and adjust or have 
it repaired before using unit.

Only trained adults may operate or service 
unit. Training includes actual operation. The 
owner is responsible for training users.
NEVER operate after or during the use of 
medication, drugs or alcohol. Unit requires 
complete and unimpaired attention.

NEVER allow children to use or service 
mower.

ALWAYS keep hands and feet away from 
rotating parts. Rotating parts can cut off body 
parts.
ALWAYS keep hands away from pinch points.

Fumes from engine exhaust can cause death 
or serious injury. DO NOT run engine in an 
enclosed area. 

ALWAYS protect eyes, face, and body with 
adequate safety gear and protective clothes. 
Wear sturdy footwear, gloves, a hard hat and 
safety goggles or safety glasses with side 
shields while operating mower. 

Wear appropriate hearing protection.
NEVER operate mower barefoot or when 
wearing open sandals or canvas shoes.

NEVER wear loose clothes, long hair or 
jewelry that may get caught in rotating parts.

ALWAYS stand clear of discharge when 
operating unit.

NEVER direct discharge toward bystanders. 

Operator is responsible for bystander safety.
DO NOT touch hot parts. Allow parts to cool.

Keep safety devices or guards in place and 
functioning properly. NEVER modify or 
remove safety devices.

Read, understand, and follow all instructions 
in the manual and on the machine before 
starting. Understand:

How to operate all controls

The functions of all controls

How to STOP in an emergency.

DO NOT attempt to start your engine until 
you know what the controls do and how they 
work.

DO NOT tilt mower when starting it.

Keep feet away when starting engine.
DO NOT start the engine or operate mower 
without side discharge cover or side 
discharge deflector installed.

Never leave a running unit unattended.

Take all possible precautions when leaving 
unit unattended.
ALWAYS shut off engine, remove key 
(electric start models) and disconnect spark 
plug wire to prevent accidental starting or 
unauthorized use.

Stop engine if anyone enters the work area.

NEVER attempt to make any adjustments to 
unit while engine is running (except where 
specifically recommended). Stop engine, 
remove key (electric start models) and wait 
for all moving parts to stop before servicing. 
DO NOT make cutting height wheel 
adjustments while the engine is running.

If you strike an object, or if equipment 
vibrates abnormally, stop engine at once, wait 
for moving parts to stop and disconnect wire 
from spark plug. Repair any damage before 
restarting unit.

Keep rear door closed when engine is 
running unless the grass bag is in place. 
Stop engine before removing and emptying 
grass bag.

When mulching or bagging, ALWAYS install 
discharge cover.

When side discharging, ALWAYS install side 
discharge deflector.

ALWAYS shut off engine, allow blade to stop 
and disconnect spark plug wire before 
clearing clogs or cleaning unit.

Summary of Contents for 911250































Reviews: