GB - 14
MOWER SET-UP
To Bag (Optional on Push Models)
1. Shut off unit.
2. Make sure mulch cover is closed and
secured with knob.
3. Lift rear door and remove mulch plug, if
necessary.
4. Seat bagger chute inside deck opening
and on top of deck.
5. Hook grass bag frame on mounting pins.
6. Lower rear door.
There should be no openings between
bagger chute and mounting surface after
installing bag. If necessary, clear debris from
bag mounting surfaces.
Grass Bag Removal
1. Shut off unit.
2. Lift rear door.
3. Use handle to lift bag off mounting pins.
4. Close rear door.
NOTE: Empty grass bag and clean mower
pan after each use. DO NOT allow grass
clumps or a grass coating to collect inside of
grass bag or mower pan. Remove grass bag
from mower, wash bag with hose and allow to
dry.
CAUTION: DO NOT operate
mower unless either side
discharge cover or side discharge
deflector is installed. Thrown
objects may cause damage or
injury. Never operate unit with
rear door open unless grass bag
is in place.
CAUTION: If clog or obstruction
prevents grass flow, release
engine/blade control and
disconnect spark plug wire before
attempting to clear away any
clogs.
CAUTION: Check grass bag
frequently for wear or
deterioration. Replace worn or
damaged bag with Ariens original
equipment replacement bag only.
Figure 10
1. Rear Door
2. Bagger Chute
3. Mounting Pin
4. Grass Bag
Frame
