08401009 • 2/15 • Page 2 of 8
4. Remove blade and blade adapter from the
crankshaft.
5. Remove two tapping screws retaining drive pulley
guide. Remove guide, pulley and key.
IMPORTANT:
Discard two tapping screws, drive pulley
guide, pulley and key.
6. Remove belt channel guides. Discard screws.
7. Pull belt over end of crankshaft to allow belt to slide
out through belt channel.
8. Rotate transmission backward to remove hardware,
then adjust to loosen belt.
9. Remove belt and pull through the belt channel. See
Figure 3
1. Blade
2. Blade Adapter
3. Drive Pulley Guide
4. Belt Channel Guides
5. Engine Pulley with Key
6. Transmission
7. Transmission Bracket
8. Belt
9. Belt Channel
10. Transmission Pulley
11. Crankshaft
