EN - 8
Never store the equipment with fuel in the
tank inside a building where fumes might
reach an open flame or spark. Allow the
engine to cool before storing in any
enclosure.
Clear debris from movable parts, but only
when the power source is shut off. DO NOT
spray water to clean unit.
Check to be sure all nuts and bolts are tight
to assure the equipment is in safe working
condition.
For extended storage, shut off fuel and
clean unit thoroughly. See engine manual for
proper storage.
ALWAYS remove spark plug wire from spark
plug before inspecting or working on this
unit.
DO NOT touch unit parts which might be hot
from operation. Allow parts to cool before
attempting to maintain, adjust or service.
Stop and inspect equipment if there is an
unusual vibration. Repair, if necessary,
before restarting. Never make adjustments
or repairs without first disconnecting the
spark plug wire.
Keep all hardware properly tightened.
Maintain or replace safety and instruction
labels, as necessary.
Check attachment components frequently. If
worn or damaged, replace with
manufacturer’s recommended parts.
ALWAYS keep protective structures, guards,
and panels in good repair, in place and
securely fastened. NEVER modify or
remove safety devices.
Hydraulic fluid can result in severe burns
.
Fluid in hydraulic system can penetrate skin
and result in serious injury or death.
•
Be sure to stop the engine and
relieve hydraulic pressure before
doing any work on hydraulic parts.
•
Keep body and hands away from pin
holes or nozzles which expel
hydraulic fluid when under pressure.
Use paper or cardboard, not hands,
to search for leaks.
•
Ensure all hydraulic fluid connections
are tight and all hydraulic hoses and
lines are in good condition before
applying pressure to system.
•
FOREIGN FLUID INJECTED INTO
BODY can result in gangrene. Fluid
must be surgically removed within a
few hours by a doctor familiar with
this form of injury.
•
Do not adjust the pressure settings
on the hydraulic pump or valve.
ALWAYS maintain unit in safe operating
condition. Damaged or worn out muffler can
cause fire or explosion.
Personal Protection
Wear adequate safety shoes and protective
gloves.
DO NOT wear loose clothing or jewelry and
tie back hair that may get caught in moving
parts.
Protect eyes, face and head from objects
that may be thrown from unit. Wear
appropriate hearing protection. Always wear
safety goggles or safety glasses with side
shields when operating.
Before Operating
Inspect unit before each use for: missing or
damaged decals and shields. Replace or
repair as needed.
Read, understand, and follow all instructions
in the manual and on the machine before
starting.
Understand:
•
How to operate all controls
•
The functions of all controls
•
How to STOP in an Emergency
