Page 2 of 6
a. Using a pry bar, remove and discard crate top
and sides.
b. Remove plastic bag from around unit and
discard.
a. Cut cable tie from discharge chute (item 7).
a. Pull transaxle bypass levers (item 8) out to
disengage transaxles. Push levers up slightly to
lock position.
IMPORTANT:
Disengage both left and right transaxles.
WARNING:
AVOID INJURY. Read and
understand the
Safety
section in the
Operator’s Manual before proceeding.
DO NOT start engine until assembly is
complete.
1.
CAUTION:
AVOID INJURY. Small wood
splinters can eject when breaking crate.
Wear adequate eye protection and gloves.
2.
3.
