EN - 14
LOWER JACK STAND
See Figure 15.
1. Remove hair pin from clevis pin and
remove clevis pin from tongue bracket.
2. Rotate jack stand down until the top of the
handle aligns with the lower notch in
tongue bracket.
3. Insert clevis pin into tongue bracket and
insert hairpin.
POSITION BEAM
Determine if the size of the logs to be split
can be safely and comfortably lifted up onto
the beam in the horizontal position. If logs are
too heavy for the operator, position the beam
in the vertical position for splitting.
Vertical Operating Position
IMPORTANT:
Rear stabilizer must be in the
transport position before placing beam in
vertical operating position. See
See Figure 16.
1. Pull beam lock out until the pin clears the
mount.
2. Rotate beam lock slightly so pin does not
return to hole in mount.
3. Lift beam until it rotates to vertical
position. See Figure 17.
WARNING:
Beam assembly is
heavy. Use care when moving
between vertical and horizontal
positions.
Figure 15
1. Clevis Pin
2. Hairpin
3. Jack Stand
4. Tongue Bracket
Figure 16
Figure 17
Summary of Contents for 017000
Page 29: ......
