Ariel Rider KEPLER, User Manual, Page: 19 / 127

17
Step 4:
Install the pedals. Locate the pedal marked with an “L” at
the pedal axle end and notches on the outside of the
pedal axle (1, at right). The pedal marked “L” with notches
goes on the crank on the left side of the bike (which is the
same as a rider’s left side when riding). The left pedal is
reverse threaded and tightens counterclockwise. Carefully
thread the pedals by hand slowly. Do not cross thread or
damage the threads. Tighten securely using a pedal
wrench to avoid damage caused by wider wrenches, as
shown in assembly video.
The right pedal is threaded so that it is tightened by turning clockwise, has an “R”
stamped into the pedal axle end, and a smooth exterior on the outside of the pedal axle.
Carefully thread the right pedal onto the crank on the right side of the bike (the side with
the drive train) slowly and by hand.
Dp not cross thread or damage the threads. Tighten securely using a pedal wrench to
avoid damage caused by wider wrenches.