12
Right Rear Wheel:
1. Slide the right rear wheel (8) onto right rear wheel axle. The
side with gear teeth faces inward. (Note: the gear teeth must
engage with the gear box.)
2. Slide the rear thin washer (12) onto the right rear axle.
3. Slide the snap pin (13) into the hole on the right rear axle until
fi
rmly attached.
4. Snap the rim (14) onto the completed right wheel assembly.
Assemble the Right Rear Wheel
Helpful Tip:
1. If you encounter trouble
fi
tting both wheels onto the rear axle,
then your rear wheel axle may need to be realigned.
2. Remove both wheels from the rear wheel axle. Using two
hands, push down on the rear wheel axle and slide it gently
toward the side of the vehicle that needs more room.
3. Once the rear axle is properly centered, refer to the above
steps to assemble the wheels.
Summary of Contents for W486TG-R-F Volkswagen Beetle
