37
Push down in center of carrier and pull the free end
of the lap belt to tighten carrier against the vehicle
seat. CHECK to make sure carrier is secure by
holding both sides near the lap belt guides and
moving it from side to side and front and back. The
lap belt should not loosen and the carrier should
not move easily. The carrier should not move more
than 1 inch (2.5 cm) from side to side or front to
back.
After installing carrier without
base check the RED level
line on the label beneath the
handle to make sure that it is
level with the ground.
If seat is still not level, refer to page 45,
when using the carrier with WITHOUT
the base.
4
5
4
5
4
5
RED
line
MUST
be level
with the ground when
installed in vehicle
WITHOUT
the base.
RED
line
MUST
be level
with the ground when
installed in vehicle
WITHOUT
the base.