23
FirmFit Load Leg (cont.)
Pull on the lower portion of the leg
until it locks into position and lies
flat on the floor.
If it does not rest flat on the floor,
you have two other options:
1) In vehicles that have a short seat
to floor height, press the button and
return the lower portion of the leg
to its stored location. Then squeeze
the black button and pull the middle
section of the load leg until it lies flat
on the floor as shown .
2) Squeeze the black button on the
upper portion of the leg to extend
the leg to the floor as shown .
ALWAYS CHECK
to make sure when
the leg rests on the vehicle floor that
it does not lift the base off the seat.
Leg must always lock into one of the
open positions before using. If leg
does not lie flat on the floor move to
another seating location or do not
use the load leg in your vehicle.
CLICK!
CLICK!
5
6
7
7
6
Summary of Contents for Asana 35 AP
Page 74: ...74 Notes...
Page 75: ...75 Notes...