background image

R-30 ME 

 

 

 

 

 

 

 

 
9. A.R.I. LIMITED WARRANTY 

 

A.R.I. Standard International Warranty 
 

A.R.I.  manufactured  products  are  guaranteed  to  be  free  from  defect  in  material  and/or 
workmanship  and  to  perform  as  advertised  when  properly  installed,  used  and  maintained  in 
accordance with current instructions, written or verbal. 
 
Should any item prove defective within the time period set forth for that item(s), but in any case 
not later than within 

12

 (twelve) months of that product having left A.R.I.’s premises, and subject 

to  receipt  by  A.R.I.  or  its  authorized  representative,  of  written  notice thereof  from  the  purchaser 
within 

30

  days  of  discovery  of  such  defect  or  failure  -  A.R.I.  will  repair  or  replace  or  refund  the 

purchase price, at its sole option, any items proven defective in workmanship or material. 
 
A.R.I.  will  not be  responsible,  nor  does  this  warranty  extended  to  any  consequential  or  incidental 
damages  or  expenses  of  any  kind  or  nature  regardless  of  the  nature  thereof,  including  without 
limitation, injury to persons or property, loss of use of the products, loss of goodwill, loss of profits 
or any other contingent liabilities of any kind or character alleged to be the cause of loss or damage 
to the purchaser. 
 
This warranty does not cover damage or failure caused by misuse, abuse or negligence, nor shall it 
apply  to  our  products  upon  which  repairs  or  alterations  have  been  made  by  other  than  an 
authorized A.R.I. representative. 
 
This  warranty  does  not  extend  to  components,  parts  or  raw  materials  used  by  A.R.I.  but 
manufactured by others, which shall be only to extent warranted by the manufacturer’s warranty. 
 
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THIS WARRANTY WHICH IS GIVEN IN 
LIEU  OF  ANY  OTHER  WARRANTIES,  EXPRESS  OR  IMPLIED,  INCLUDING  ANY  IMPLIED  WARRANTY 
OF FITNESS FOR A PARTICULAR PURPOSE. 
 
(R

10822

 

 

 

Ori Sheffi 
 C.E.O 

Summary of Contents for Eliptix R-30ME






















Reviews: