manualshive.com logo in svg

Argus QUICK 100 M, Service Manual, Page: 9 / 22

Share
Download
Argus QUICK 100 M Service Manual Download Page 9

 

 

SOFTWARE UPDATES 

14.147.B_QUICK100M en.SM.V1.00.doc 

ARGUS Medical AG 11.08.04 / PJ 

9 / 22 

4.2. Updating the User Program 

 

To update the user program please go through the following steps to ensure a 
complete software download: 

1.  Select menu 1 in the main menu of the boot loader by typing a "1" in the termi-

nal program.  

The boot loader will now clear the sectors containing the user program!

 

2.  Select menu 2 in the main menu. The QUICK

®

 100 M docking station will now 

be ready to receive flash programming data. 

3.  Send the file "Q100_xxx.txt" as text to the QUICK

®

 100 M docking station by 

using the menu "Send text file..." in the menu "Transfer" of the Hyper Terminal 
program. 
This part will take some time until the entire data is flashed. The QUICK

®

 100 

M docking station will flash the red LED as long as it's receiving data from the 
PC. 

4.  After a successful download, the QUICK

®

 100 M docking station will acknowl-

edge the end by ringing the internal buzzer twice. 

5.  Select menu 5 to quit the boot loader mode of the device. You will be asked if 

you want to quit. After confirmation the QUICK

®

 100 M docking station will now 

run in the normal mode. 

 
Important Remark: 
Updating the user program does not have any influence on the boot loader soft-
ware. 
If you quit the boot loader mode without any valid user program in the flash mem-
ory, the device will always enter the boot loader mode. 
 
 

4.3. Updating the Boot loader Program 

 

We recommend updating the boot loader only if it's required by your local distribu-
tor or by ARGUS Medical.  
To update the boot loader program please go through the following steps to en-
sure a complete software download: 
 

1.  Select menu 3 in the main menu of the boot loader by typing a "3" in the termi-

nal program.  

The boot loader will now clear the sector which contains the boot loader 
program!

 

2.  Select menu 4 in the main menu. 

3.  Send the file "AMLQ100_xxx.txt" as text to the QUICK

®

 100 M docking station 

by using the menu "Send Text File..." in the menu "Transfer" of the Hyper Ter-
minal program. This part will take some time until the entire data is flashed. 
The QUICK

®

 

100 M docking station will flash the red LED as long as it is re-

ceiving data from the PC. 

Summary of Contents for QUICK 100 M























Reviews:

No comments