Argus 165 Manual Download Page 90

Page: 90 / 363

8 Operation with Ethernet accesses

ARGUS 165

8.4 DDM test (SFF 8472)

With the Digital Diagnostic Mode (DDM) test according to SFF 8472, ARGUS detects



various optical and electrical line parameters, such as link speed, transmission level or the
remote station currently in use.

Starting the DDM test (access mode: Ethernet SFP1)

ARGUS in status screen.



The profile shown in the display (profile 1
in this example) is used for the DDM test.



It is not necessary to establish a link with
the remote station.



Continued on next page

<Start>

Activates Ethernet.

<Info>

Displays Ethernet connection
parameters.

<Test>

Displays the available tests.

<Stop>

Stops the Ethernet connection.

Display:

- Autonegotiation setting

- Autoneg. at other end

- Negotiated speed

- Type of duplex mode

- Flow control setting

<Statistic>

Opens Ethernet statistics.

Summary of Contents for 165












































































































































































































































































































































































Search results

Summary of Contents for 165

Reviews:

Related manuals for 165

Brands by name

Popular brands

Argus 165, Manual

Search results

Summary of Contents for 165

Reviews:

Related manuals for 165

Brands by name

Popular brands