Argus 165, Manual

Page: 314 / 363

27 ARGUS settings
314
ARGUS 165
Ring

volume
You can set the volume of the ring tone ARGUS uses to signal an incoming
call.

For one thing, you can adjust the initial volume.

- Default: Level 1 (very quiet)

You can also adjust the end volume.

- Default: Level 7 (very loud)

For an incoming call, ARGUS begins with the initial volume (very quiet) and
increases the volume with each ring until it reaches the final volume level
(very loud).
Alarm tone
ARGUS generates alarm tones in different situations, e.g. as soon as a bit
error occurs in BERT or ARGUS has synchronised with an xDSL access, and
when error counters reach high counts.
Short - long Successfully synchronised
Long - short Lost synchronisation
Short - short Error counter spike (the tone relates only to the last

second. Only one tone sounds even when multiple errors are
displayed.)
The setting "off" suppresses all alarm tones.

Default: off
Jingle
An ARGUS jingle is played after the device powers up and initialises.

Default: off
Power

management
Automatic off: Sets the no-activity period after which ARGUS switches to
power-saving mode when the power supply is not connected. When power-
saving mode is turned off entirely, ARGUS will display a warning that
switching off power-saving mode reduces the battery time the next time it is
powered up. You can deactivate this warning with the "X" key.
<On>
cancels
deactivation.

Default: after five minutes
llumination Sets the duration for background illumination Background
illumination is always on when the power supply adapter is connected. In
battery mode, ARGUS switches off background illumination after a set time.

Default: after 30 seconds
Company
address
Entry of the customer address for the measurement log. Each configuration
item permits up to 29 characters.
Company name Default: */*
Street Default: */*
ZIP/City Default: */*
Phone number Default: */*