ArgoxScan AS-8150 User Manual Download

Page: 13 / 110

Exit

Interface Selection

This decoder built-in scanner comes in one model and

supports interfaces such as keyboard wedge, RS232 serial

and the latest USB interface. In most of the cases, simply

selecting an appropriate cable with a device code will work

for a specific interface.

Interface selection:

You can change factory interface

default for another type interface. By plugging different

cables, setting right interface, the scanner will change to

another interface. However, you must make sure which cable

you need.

RS232/ USB HID Auto detection:

By setting this function, it

will automatically select the RS-232 or /USB HID interface for

the user.

Option Bar Code

Option

Alphanumeric

Entry

Interface selection

RS-232

USB HID

RS232/

USB HID

Auto detection

USB COM

＊

Program

Note:

＊

-Default

Summary of Contents for AS-8150















































































































Search results

Summary of Contents for AS-8150

Reviews:

Related manuals for AS-8150

Brands by name

Popular brands

ArgoxScan AS-8150, User Manual

Search results

Summary of Contents for AS-8150

Reviews:

Related manuals for AS-8150

Brands by name

Popular brands