Argox AR-3201, User Manual

Page: 45 / 165

37
3.3 Wireless Features
AR-3201 offers some operating modes that
help prevent data loss and extend battery life.
This section describes how to use these
modes.
￭ Handcuff mode (Leash Alarm)
You can decide how long your scanner beeps
after it lost Bluetooth connection.
￭ Data Collection mode
You can decide whether your scanner stores data
in its storage when it lost Bluetooth connection.
The storage size is 7 KB. If the storage is full,
you’ll hear an error beep when your scanner tries
to store data in it.
Note:
1. The scanner will preserve barcode when the
wireless is off, and will output data right after the
scanner is wirelessly connected to the cradle.
2. The scanner will preserve barcode when the
wireless is off, and will output data after the
scanner is wirelessly connected to the cradle and
its trigger key is pressed.
3. For the Force option, the scanner will preserve all
barcode until it is placed on the cradle.
￭ Deep Sleep mode
To save battery power, you can put your scanner
into sleep if it doesn’t work in a certain amount
of time. To wake it up, just pull the trigger. Note
that your scanner needs 2-3 seconds to wake up,
since the engine needs a little time to start.