Argox AI-6821 User Manual Download

Page: 83 / 170

Data Magic commands

InsertF

Definition

Insert a
character or
characters from
the left of a
text string.

Attributes

￭

Position: The position you
want to insert the character.

￭

String: The specified group.

InsertB

Definition

Insert a
character or
characters from
the right of a
text string.

Attributes

￭

Position: The position you
want to insert the character.

￭

String: The specified group.

CutF

Definition

Remove a
character or
characters from
the left of a
text string.

Attributes

￭

From: The start position of
the text to be removed.

￭

To: The end position of the
text to be removed.

CutB

Definition

Remove a
character or
characters from
the right of a
text string.

Attributes

￭

From: The start position of
the text to be removed.

￭

To: The end position of the
text to be removed.

Summary of Contents for AI-6821











































































































































































Search results

Summary of Contents for AI-6821

Reviews:

Related manuals for AI-6821

Brands by name

Popular brands

Argox AI-6821, User Manual

Search results

Summary of Contents for AI-6821

Reviews:

Related manuals for AI-6821

Brands by name

Popular brands