- 27 -
USING DVD-ROM WITH PCMCIA INTERFACE
To Connect The PCMCIA DVD-ROM To Your Computer
♦
Windows 95/98/Me/2000, and WindowsXP:
1. Boot into the Windows system.
2. Insert the plug of the PCMCIA interface cable into the Interface Connector of drive.
3.
Make sure the Power Source Switch is at the correct position:
PC: get power from the PCMCIA socket of computer.
DC: get power from the AC adapter.
4. If you are using the AC adapter, connect the AC adapter lead to the Power Jack (DC IN) at the rear
panel of the drive. And then attach the AC adapter to the AC power outlet.
5. Slowly insert the PC Card of interface cable into the PCMCIA socket of computer and press firmly
until the connector is seated. Your PCMCIA DVD-ROM is now ready for use in few seconds.
♦
Windows NT, DOS/Windows 3.1 and OS2 WARP:
1. Power-off the computer.
2. Insert the plug of the PCMCIA interface cable into the Interface Connector of drive.
3.
Make sure the Power Source Switch is at the correct position:
PC: get power from the PCMCIA socket of computer.
DC: get power from the AC adapter.
4. If you are using the AC adapter, connect the AC adapter lead to the Power Jack (DC IN) at the rear
panel of the drive. And then attach the AC adapter to the AC power outlet.
5. Slowly insert the PC Card of interface cable into the PCMCIA socket of computer and press firmly
until the connector is seated.
6. Power-on computer, the PCMCIA DVD-ROM will ready for use after boot into the operating
system.
