- 14 -
SOFTWARE INSTALLATION FOR WINDOWS XP
1. Boot-up your computer into Windows XP,
making sure the device driver for ‘PCMCIA
Adapters’ has been installed and is available. To
check this, right-click ‘My Computer’, click
‘Properties’ then ‘Hardware’ and then ‘Device
Manager’ to open the ‘Device Manager’
window. Refer to the figure shown alongside to
see if the PCMCIA Controller is installed without error.
2. Ensure the PCMCIA interface cable and then the AC adapter connections (if you are using the AC
adapter) are made as described in Hardware Installation. Slowly insert the PC Card of interface
cable into the PCMCIA socket of computer and press firmly until the connector is seated (Please
note that the PC Card is keyed to guide for proper insertion).
3. Windows will find a new hardware
named ‘PCMCIA PnPIDE’, and start
up the ‘Found New Hardware Wizard’.
On the first screen, select ‘Install from a
list or specific location (Advanced)’,
and then click
Next
.
