Argosy HV358T, User Manual, Page: 11 / 48

Using the AV Playback Function
7
Using Coaxial Output Digital Audio
To output the digital audio signal, connect this connector to an AV amplifier (receiver)
which equips a digital audio decoder. You will also get multi-channel sound effect if the
audio source carries it.
Power Connection
1. Connect the DC jack of the AC adapter to the connector marked “ DC IN ”, plug the other
end into an electrical outlet.
2. Press the Power switch and then the blue LED will light up with low luminance, entering a
mode called “Standby mode.” You can press (
STANDBY ) button on the remote to
activate the unit for playback. Pressing the ( STANDBY ) button again will switch to the
standby mode.
Standby:
LED lights up with low
luminance
Activated:
LED lights up with high
luminance