background image

Safety and Care Advice

Important

 

– Please read these instructions fully before starting assembly

• Check you have all the 
components and tools listed on 
pages 2 and 3. 

• Remove all fi ttings from the 
plastic bags and separate them 
into their groups.

• Keep children and animals 
away from the work area, small 
parts could choke if swallowed.

• Make sure you have enough 
space to layout the parts before 
starting. 

• Do not stand or put weight on 
the product, this could cause 
damage.

• Assemble the item as close 
to its fi nal position (in the same 
room) as possible.

• Assemble on a soft level 
surface to avoid damaging the 
unit or your fl oor.

• Parts of the assembly will be 
easier with 2 people.

 • We do not 
recommend the 
use of power 
drill/drivers 

for 

inserting screws

as this could 

damage the unit. Only use hand 
screwdrivers.

• Dispose of all packaging 
carefully and responsibly.

• Only clean using a damp cloth 
and mild detergent, do no use 
bleach or abrasive cleaners. 

• From time to time check that 
there are no loose screws on 
this unit.

• This product should not be 
discarded with household waste. 
Take to your local authority 
waste disposal centre.

Care and maintenance

Glue safety 

-

 

Take care when using glue, please follow the advice below

Eye contact:

 Rinse immediately

with clean water for 15 minutes
and seek medical advice.

If swallowed:

 Seek medical

advice immediately.

Skin contact:

 Remove

contamination by washing with
soap and water. This procedure
should also be followed prior to
eating and drinking.

 2

Summary of Contents for White Toddler bed 4277891










Reviews: