Computer Operation
Functions and operations
9
http://www.argoshelpdesk.co.uk
A.Power up:
After power up, all LCD segments will light up for 2 seconds and CPU will be reset the resistance into level 1.
The monitor will go to initial mode.
1.If the connection cables were pre-installed incorrectly, motor will not run. Before asking service,please
examine if all connection cables are well connected and then reset the power to release the beep sound or
press “ START / STOP (Hold to reset) “ button to restart system. If the motor still don't run, please call
service..
2.If the monitor shows “ E2 ”message, please call service.
B. KEY FUNCTION
:
a. START/STOP:
To start or pause exercising .
b.FUN/SCAN:
1.Stop condition, press this button to enter parameters Settings
2.Confirm the set values of the parameters and into the next parameter Setting
3.The START state, press this button displays the current fixed parameter values, and then press the switch
for automatic scanning function parameters display
_`{
1. In the condition of parameter Settings, increase to adjust parameter values
2. In the START state, increase the resistance movement
|}{
1. In the condition of parameter Settings, reduce to adjust parameter values
2. In the START state, reduce the resistance movement.
e. PROGRAM
1. STOP state, select the user required movement patterns
2. Any state, long press this button for 5 seconds, electronic watch reset, in addition to the ODO reset all
data
~ Q{ ^<= *_+ ;
~ @{ !\ %!>*|+ ;J !%!
= <!