Assembly Instructions
4
Prepare small drawer
fronts and wraps x 2
Note:
The small right
drawer front has a
small identification
hole.
a:
Screw 2 x metal
dowels into the holes
on the back of the small
drawer fronts and .
Note:
Tighten metal
dowels up fully against
the panels.
b:
Insert 2 small locking
nuts into the holes
shown on the drawer
wrap .
Note:
Arrow on locking
nut
must
point towards
hole in edge of panel.
B
4
5
a:
a:
b:
b:
F
9
F
Assemble small
drawers x 2
a:
Place small drawer
base into the narrow
slot on the small drawer
wrap . Fold wrap
around the base.
b:
Turn each of the
drawer wrap assemblies
over and push onto the
back of the small drawer
fronts and .
Turn locking nuts
clockwise to secure
panels - more than 1/2 a
turn.
7
9
4
5
F
If you have damaged or missing components, call the
Customer Helpline: 08456 400800
quoting the reference
numbers below
90%
5
Identification
hole
and
B
B
B
B
B
F
F
B
4
5
9
9
9
9
7
4
5
F
F
Step
1
Step
2
plain surface
Note:
Due to the manufacturing process, the holes for the
locking nut can be on either surface of the drawer sides.
Note:
The locking nuts can
be on either surface of the
drawer sides.
Note:
Due to the manufacturing process, the holes for the
locking nut can be on either surface of the drawer sides.
Note:
The locking nuts can
be on either surface of the
drawer sides.
