Safety and Care Advice
Important
– Please read these instructions fully before starting assembly
Care and maintenance
To avoid any risk of
suffocation to animals or
children dispose of the plastic
bags immediately.
While aluminium is rust
resistant, bare metal can show
signs of oxidation (red film) this
does not constitute rust. Simply
you are able to wipe or sand
surface to remove oxidation
mark.
Read these instructions
carefully and familiarise
yourself with the procedure
before assembling the unit.
Check that you have all the
component parts following the
list on the back cover and
familiarise yourself with each
part before proceeding.
Take all the fittings out of the
plastic bag and separate them
into their groups.
Ensure you have enough
space to lay out all the parts
before assembly.
To avoid scratching it is
recommended that you
assemble the unit on a soft
level surface.
Do not stand on furniture for
your own safety & for the sake
of the furniture.
Do not allow children to play
under tables.
At least 2 people are
required for this procedure.
Dispose of all packing
carefully and responsibly.
Keep children and animals
away from the work area,small
parts could choke if swallowed.
From time to time please
ensure there are no loose
screws on the product.
The unit
weights approximately
46 kgs.
Warning:
Please lift with care.
1
Do not drag or lean back
chair, sofa, benchers whilst
sitting on them
Please secure furniture
in climatic weather, as
lightweight aluminium can
become a projectile.
It is important to keep fabric
free of dust and or debris.
Please vacuum at least every
2-3 weeks.Spot cleaning warm
water & soft soap solution,
sponge onto affected area till
clean rinse area with clean
sponge, pat dry with a soft
clean cloth.
Use a bucket filled with warm
water & a soft soap, sponge
over frame till clean, once
clean rinse off with a hose, pat
dry with a soft clean cloth
before use. Every 4-6 weeks
Ensure not left wet for long
periods of time to avoid mould
build up.
•
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
