Assembly Instructions
Assembly Instructions
Stage 9 –
Finishing the Unit
Stage 8 –
Fitting the Drawers
fig. 21
1. Carefully place the unit in the
desired location.
See fig. 21.
fig. 20
E
N
fig. 19
IMPORTANT: When drilling into
walls always check that there
are no hidden wires or pipes etc.
Make sure that the screws and
wall plugs supplied are suitable
for supporting the unit. Consult
a qualified tradesperson if you
are not sure.
NOTE: It would be useful to ask
someone to help you at this
stage.
See fig. 19.
2. Use Screw
E
to fix the Wall Strap
N
onto the top of the unit.
See fig. 20.
4. Use Locking Nuts
K
to fix the Front
Panel onto the drawer. Then use
Screws
F
to fix the Handles O
onto the Front Panel.
See fig. 17.
6. Use Screws
H
to fix the Drawers
onto the tracks.
See fig. 18.
5. Follow the same method as in fig.
14-17 to complete the other
Drawer.
H
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Fitting
From time to time please ensure there are no loose screws on the product.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
After sales telephone number - 08456 400 800
NOTE: Before use always make
sure the unit is secure. Please
wait 8 hours until Glue is
completely dry
fig. 17
O
K
K
F
fig. 18
N
O
F
3. Drill a hole at the desired height
and insert Wall Plug
O
into the
hole. Pass Screw
F
through loose
end of Wall Strap
N
to fix the unit
to the wall.
