Argos 257/2471 Assembly Instructions Manual Download Page 15

Page: 15 / 16

Assembly Instructions

If you need help or have damaged or missing parts, call the

Customer Helpline: 08456 400800

and quote the reference numbers on the component pages.

Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW

Step

Warning:

The

unit is heavy.

Lift with care.

Fit the bracket

To prevent possible

overbalancing we

recommend that this unit

is secured to a suitable

wall using the bracket ,

fitted just below the

modesty, on one of the

side panels with the

screw .

Fixings are not supplied

as they will need to suit

the wall type, and the

length of screw will

depend on the distance

of the back of the unit to

the wall.

Warning: Take care when

drilling the wall that you

do not drill into any

pipes, wires etc. If in

doubt, consult an expert.

Assembly is complete

The Bracket can be

fitted to either the Left

Side or the Right Side.

Summary of Contents for 257/2471

















Search results

Summary of Contents for 257/2471

Reviews:

Related manuals for 257/2471

Brands by name

Popular brands

Argos 257/2471, Assembly Instructions Manual

Search results

Summary of Contents for 257/2471

Reviews:

Related manuals for 257/2471

Brands by name

Popular brands