Step 5
Use the Roof Support Block Locater to fix the roof support block in the correct positon. As shown in the
diagram position the roof support block locater flush with the top of the back corner of the building, put
the roof support block directly underneath the locater and mark where the roof support block is posi-
tioned. Pre drill two holes on either end on the outside as shown in side view.
Fix the roof support block from the outside using 4x50mm screws as shown in diagram. Place roof purlins
into position (make sure the angled cut on two of the purlins is against the front panels) and fix to support
block using 70mm screws from the bottom up into the purlins (pre drill holes first).
4x50mm Screws
3x70mm Screws
Pre drill
hole
50mm
screw
70mm
screw
Step 6
Fix the roof purlins to the front
panels using an “L” bracket and
4x30mm screws per bracket.
12x30mm Screws
Pre drill
hole
30mm
screw
Step 7
Layout the roof sheets and
position the roof framing as
shown in the diagram.
Ensure the framing is level
around the edges and fix into
place using 40mm screws.
* It is recommended to cut the
felt sheets before fixing into
place.
24x40mm Screws
Pre drill
hole
40mm
screw
9
13
9
12
15
15
16
16
Ensure angled cut is
against front panel
11
10
11
26
P 5
Please retain product label and instructions for future reference
134mm
95mm
SIDE VIEW
11
10
11
20
