background image

to suit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Safety and Care Advices

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

Care and maintenance

Glue safety - Take care when using glue, please follow the advice below

Additional Guidance

• Keep children and animals 

away from the work area, small

parts could choke if swallowed. 

• Make sure you have enough space

to layout the parts before starting.

• This product has been constructed 

to be used in the domestic 

environment only and not for 

commercial purposes.

• Only clean using a damp cloth

and mild detergent. Do not use 

abrasive cleaners

• Use a dry cloth to clean the 

product, furniture polish is not 

recomended.

• Check that the bath has been installed correctly and that it is level, tiled down onto and sealed 

to the manufacturer’s guidelines.

• All product supplied without bath.

• Check that there is sufficient space on the bath for the product and that the screen movement 

does not foul other items such as sinks and taps.

• Ensure the product is fitted to a non-porous surface ie. tiled. 

• Check that the wall surface is flat.

• Unpack and check the product  is complete and undamaged.

• Fixings are supplied for solid walls only. Ensure that the correct fixings are used for the wall type 

- if in doubt seek professional advice

• Ensure the area is clean, dry and dust free.

• Read the instructions in full.

• Have the correct tools available

• From time to time check that there 

are no loose screws, nuts or bolts.

If there are please re-tighten.

• This product should not be

discarded with household 

waste. 

Take to your local authority 

waste disposal center.

Skin contact: 

Remove contamination by washing with soap and water. Procedure should also 

followed prior to eating and drinking.

Eye contact: 

Rinse immediately with clean water for 15 minutes and seek medical advice.

If swallowed:

 Seek medical advice immediately.

• Assemble the item as close

to its final position (in the same 

room) as possible.  

• Assemble on a soft level surface to

avoid damaging the unit or your 

floor.

• We do not 

recommend the 

use of power 

drill/drivers for 

inserting screws 

as this could damage the unit. 

Only use hand screwdrivers.

• Parts of the assembly will be 

easier with 2 people.

• Dispose of all packaging 

carefully and responsibly.

Summary of Contents for 942/4072














Reviews: