w w w . a r g o n a u d i o . c o m 5
BASS 12 & 15
Subwoofer positioning
As explained on page two under “Subwoofer
positioning” you have various choices.
The above illustrations are the optimal
placements of both loudspeakers and the
Subwoofer.
However, in “real life” it can be difficult to set
up at sound system optimally.
As mentioned, the Subwoofer is the
loudspeaker that is least affected by the
positioning.
So once again, feel free to experiment.
Specifications
Type: Reflex port cabinet
Speaker: 1 woofer Driver (12” or 15”)
Inputs: L/R RCA stereo input, LFE RCA input
Output: Link (for extra subwoofer)
Main voltage: 220-240V, 50/60Hz
Amplifier type: Class D Hi-Fi Amplifier
Woofer: 12” or 15” Long stroke Woofer
Speaker
Phase regulation: yes 0-180 degrees
Volume regulations: yes
Auto stand-by: yes after app. 20 min.
Frequency Response: (-3db): 21Hz-16o Hz.
Cross over Frequency: 40-160Hz adjustable
Output Power: 1x500W (RMS)
Weight: BASS12 18 kg, BASS15 25,5 kg.
Troubleshooting
Basic troubleshooting
If the LED indicator lamp does not light up,
check...
that the power cord (9) is firmly plugged into
the wall outlet
that the POWER switch (10) on the rear panel
is ON
that the MODE switch (8) is set on either ON
or AUTO
that the mains voltage is correct and matching
the subwoofer
If no sound, check...
that the subwoofer is turned on (6) (indicator
LED lamp glows blue) that the VOLUME
control (4) on the rear panel is not all the way
down
that the input cable (1) or (2) is firmly plugged
in both subwoofer and that the subwoofer
gets a signal from the amplifier/av reciever
